PERFORMANCE | Engine power @ 2,250 rpm | 60 hp* | Torgue at 1,400 rpm | 212 Nm | PTO power at rated engine speed | 48 hp** | * Certified to BS AU 141a | | ** Manufacturer’s estimate | | |  | | | ENGINE | Make /Type | Diesel/ T 3.1524 | No. of cylinders | 3 | Injuction | Direct | Bore | 91.4 mm | Stroke | 127 mm | Capacity (liters) | 2.5 litre | Compression ratio | 16.5:1 | Starting aid | Thermostar | Throttle Control | Hand and foot | Cooling | Water | Air Cleaner Type | Oil bath | Air Pre-Cleaner | Over bonnet, Air swirl | Fuel filter | Dual, High capacity | Exaust | Vertical | Oil Cooler | Water Cooled | |  | | | ELECTRICS | Voltage | 12V, negative earth | Battery | 118 Ah | Starter | 2.2 kW | Alternator | 32 Amp. | |  | | | CLUTCH | Type | Dual Clutch | Diameter | 305×254 mm | |  | | | TRANSMISSION | Type | Sliding spur | Number of gears | 8 forward, 2 reverse | Road speed at 2,250 engine rpm with 14.9 / 13 – 28 rear tyres | . | Gear Speed | (kph) | Forward 1 (first low) | 2.6 | Forward 2 | 3.8 | Forward 3 | 5.2 | Forward 4 | 7.0 | Forward 5 ( first high) | 10.4 | Forward 6 | 15.2 | Forward 7 | 20.8 | Forward 8 | 28.0 | Reverse 1 (Low) | 3.5 | Reverse 2 (High) | 14.1 | |  | | | POWER TAKE OFF | Type | Live | Engine speed @ 540 PTO rpm | 1,789 rpm | Shaft diameter | 35 mm | No. of splines | 6 | |  | | | HYDRAULICS | Functions | Draft Control, Position Control, Response Control, Constant Pumping | Pump Type | Reciprocating Ferguson | Oil Flow | 16 litre/min | Pressure | 21 MPa at normal operating temperature | lift capacity with lower links horizontal | 2,145 kg | Lower links | Cat. I & II with interchangeable balls | |  | | | STEERING | Steering | Hydrostatic | | |  | | | FRONT AXLE | Axle Type | Box Section, Adjustable | |  | | | REAR AXLE AND BRAKES | Brake Type | Oil immersed, multi-disc | Actuation | Mechanical | Axle Type | Straddle Axle with Epicyclic Reduction Unit | Parking Brake | Hand lever operated | Differental lock | Mechanical | |  | | | INSTRUMENTATION | Gauges | Tachometer, Hourmeter, Fuel level, Battery condition & Water temperature | Warming lights | Direction indicators, Battery Charge, Headlight main beam Low engine oil pressure, Brake light & Auxiliary Socket | |  | | | TYRES | Front | 7.50-16 (6PR) | Rear | 14.9/13-28 (6PR) | |  | | | TRACK ADJUSTMENT | Front axle | 1,275-1,884 mm | Rear axle | 1,438-2,125 mm | |  | | | WEIGHT AND DIMENSIONS | Weight (with 7.50-16 front & 14.9 / 13-28 rear wheel and with full Fuel, oil & water) | . | Gross Weight (Approx) | 2,010 kg | | | Dimensions | . | Wheel base | 2,032 mm | Overall length | 3,353 mm | Width minimum | 1,890 mm | | | Height | . | Over Exhaust | 2,236 mm | Over Steering Wheel | 1,499 mm | | | Turning Circle | . | With brakes | 5,867 mm | Without brakes | 6,833 mm | | | Ground Clearance | . | Ground Clearance Under gear box | 400 mm | |  | | | CAPACITIES | Fuel Tank | 47.5 L | Engine sump | 6.8 L | Cooling system | 11.7 L | Hydraulic system | 36.0 L | Steering | 2.0 L | Oil bath air cleaner | 0.5 L | |  | | | STANDARD EQUIPMENT | Weight frame without weights, Standard tool box with set of tools, Top link, Top link end Cat-I, Cat & II balls, Check Chains, Spring suspension seat, Flat top fenders, Operator’s & Service manual. | | | OPTIONAL EQUIPMENT | Front end weight, Swinging drawbar, Sun Conopy, Pintle Hook and 9 Hole drawbar. | | | NOTE: | Millat Products and Specifications are subject to change without prior notice. | | |
Please can send me the quotation of the Massey Ferguson MF240 IN 50 HP, 2018 Model and Massey Ferguson MF360 IN 60 HP, 2018 Model.
Dear Leo Paulus
where you located ,please mail me at info@haniffarm.com or haniffarm@yahoo.com whatsapp me +923214907810
Millat Tractors Massey Ferguson MF 360
I need this one please give me all details
Current price full payment advance payment booking details and devlivery timing
Bhakar city
AOA sir i heard that MF-360 occuring a problem of FUEL COMBUSTION .
My neighbor is facing this problem Hardly .
i have also plan to BUY MF_360;
Kindly guide me about this
and also the process of purchasing .
thank You .
Regard:
Ifraheem faroqee
District Dera Ismail Khan
Dear Naveed! Is there any update regarding the above.
Regards,
Please confirm the performance of MF360 at thresher. As MF 260 & 360 have same engine specifications, and it was used to listen the comments about MF 260 is not good for thresher because it was heated up with continuous use. Does there any improvement in MF 360 to overcome this problem.
Please advise in your earliest possible time because I want to change My MF 240 with MF 360.
Regards,
Ahsan
Dear Ahsan Wali,
I shall consult some Agri Engineer for this inquiry please. Lets wait for some farmer feedback here as well.
Warm Regards,
Thanks a lot your response. Waiting for the some technical feed back.
Regards,
Plz comennt about Massey 260 and 350or 360 which one good?