Fiat Tractor 480 Price in Pakistan

Here is the Fiat Tractor 480 price in Pakistan 2020.

Updated on : Nov 23, 2020

You can check the prices of all Fiat tractors here,

Fiat Tractors Price in Pakistan 2021

Booking Rate Ex factory: Rs. 9,00,000/-

Features of Fiat Tractor 480:

Model Fiat Tractor 480 is a 55hp, 3 Cylinder quality tractor, designed to meet your expectations in a cost effective manner.

This model is also available in Power Steering.

SPECIFICATIONS OF Fiat Tractor 480:

ENGINE POWER
At Fly Wheel                    55 Horse Power (2WD)
OPERATING WEIGHT
1710 KG
ENGINE
New Holland 8035.06
4-Stroke, direct injection diesel engine
Number of cylinder: 3
Bore and stroke:          100 x 115 mm
Piston Displacement:   2,710 cc
Compression ratio:      17:1
Max. Torque at 1,500 rpm:     22.7 kgm
Dry-type cylinder liners
Water cooled, Four-row brass tube & copper fin radiator
Forced-feed lubrication system
Distributor-type fuel injection pump with mechanical speed governor
Vertical exhaust muffler
FILTERS
Air: Oil-bath with pre-cleaner
Fuel: 2 replaceable cartridges.
Oil: Easy-to-change, continuous flow cartridge.
CLUTCH
Dual plate, dry-type, with separate controls (pedal for transmission and hand lever for PTO)
Diameter of plates:      11 inch
Plate facing of asbestos compound
TRACKS
Front (8 position):
1.320 – 1,420 – 1,520 – 1,620- 1,720 – 1,820 – 1,920 – 2,020 mm
Rear (8 position):
1,200 – 1,300 – 1,400 – 1,500- 1,600 – 1,700 – 1,800 – 1,900 mm
BRAKES
Service dry band-type with mechanical control
Parking: with hand lever
STEERING
Manual, recirculating ball type, centre relay lever, joints lubricated for life
CAPACITY
Fuel tank: 54 Itr
Engine oil: 8 Itr
Hydraulic Transmission: 18 Itr
Rear Axle: 2+2 Itr at both sides
Air Cleaner: 1 Itr
TYRES
Front: 6.00-16 Inches
Rear: 12.4/11-28
DIMENSIONS
(With 6.00-16 and 12.4/11-28 tyres)
A: Wheelbase: 1,920 mm
B: Overall length: 2,960 mm
C: Height to top of hood: 1,390 mm
D: Height to steering wheel: 1,490 mm
E: Front track (8 positions): from 1,320 to 2,020 mm
F: Rear track (8 positions): from 1,200 to 1,900 mm
G: Ground clearance under front axle: 480 mm

TRANSMISSION
Gear box with constant-mesh gears: 8 forward and
2 reverse speeds;
Synchromesh on 3rd, 4th, 7th and 8th speeds
Differential with pedal actuated lock and automatic disconnection
Single-reduction spur gear final drives
Gear Box mounted starter safety switch
FRONT AXLE
Telescopic type, inverted U, variable track
POWER TAKE OFF PTO
6 spline shaft – 35 mm dia
Fully independent: 540 rpm at 2,160 engine rpm
High-speed DTO 35 mm dia same speed as engine for application of high speed implements.
HYDRAULIC LIFT
With draft and position control, Draft control through top link, Gear type hydraulic pump driven from engine crankshaft, Pump capacity: 22.7 1/min
Relief value opening pressure: 150-170 kg/cm2
3-point linkage Cat I-II
Manual response control
Lower links with sway restrictors
Control Lever with safety stop.
Max. Lifting capacity: 1,450 kg
BODY
Hood has side-hinged cover for engine inspection. Front grill is easily removable for quick access to air cleaner and battery.
DRIVER’S SEAT
Fully upholstered with parallelogram suspension, adjustable to driver’s weight.
LIGHTING SYSTEM
With 3-position headlights, plough lamp, blue high beam warning light on dashboard, low oil pressure warning light.
ELECTRICAL SYSTEM
12 Volt starting system, 4hp (3kw) starter motor, 400 watts alternator, 100 ah battery.
OPTIONAL
Canopy, Towing hook, Swinging Draw bar, Cold Starting aid, Front weight, High Clearance Kit, Low Clearance Kit, DTO pump applications and Creeper gear etc.